Plague Mask - for 3D Printing

DIGITAL .STL FILE FOR 3D PRINT.

-If you use a FDM Printer make sure to print the mask vertically, like the image 'print orientation.jpg' on 'imgs' folder. In this way supports are only nedded on the base.

-If printing with FDM I recommend use a resolution of 0,16 or less to keep the details.

-The model is hollow, so keep in mind that if you scale down the model the walls maybe get too thinner.

-This model was NOT TESTED on SLA printer. So maybe some adjusts must be made.

-If using Cura enable 'support roof' on support settings to make them easy to remove.

Thank you for support.